Category
Updated November 11, 2026
 *InfoLink publishes spot price based on prices at which orders are delivered and new orders signed from Thursday of the previous week to this Wednesday.(11.5-11.11)
 

Polysilicon

Polysilicon prices remain stable this week. The reference price for n-type recycled polysilicon stands at RMB 42–43/kg, with limited volumes of signed orders. Shipments of n-type granular polysilicon remain relatively stable, with transaction prices at RMB 40–41/kg. Both price ranges are unchanged from last week. The price range for mixed-lot polysilicon widens, with reported average purchase prices ranging from RMB 36–40/kg depending on each buyer’s procurement conditions. Cauliflower-like polysilicon prices have edged lower.

Transactions are limited to a handful of previously placed orders, while new orders remain under negotiation. Falling polysilicon futures, warehouse receipts covering around 50,000–60,000 MT set to expire at the end of November, slow polysilicon destocking, weaker downstream demand, and declining wafer prices all narrow the range of polysilicon prices wafer makers are willing to accept. These factors also affect how wafer manufacturers adjust their feedstock mix to reduce average material costs. Polysilicon manufacturers continue to insist on spot prices at or above their full production costs. Buyers and sellers remain apart on price, leaving negotiations for new orders at a standstill. Near-term price movements have yet to align across the supply chain.

On the supply side, some polysilicon manufacturers have gradually implemented production cuts since October. Based on current production schedules, China's polysilicon output is expected to decline to approximately 82,000 MT in November. However, inventory levels still warrant attention, with polysilicon manufacturers holding approximately 380,000–390,000 MT in stock as of the end of October.

Overall, tighter supply helps ease oversupply, while wafer manufacturers’ margins remain under pressure. Price adjustments and actual deals still hinge on negotiations between polysilicon and wafer manufacturers. The spot market is expected to remain at a standstill in the near term, with trading volumes unlikely to pick up until downstream buyers resume restocking. The market continues to monitor the progress of production cuts and restarts, the implementation of energy consumption limits, and changes in downstream purchasing patterns.
 

Wafer

Wafer prices fall more sharply this week, with transaction prices down across all three mainstream formats. Downstream buyers remain cautious as some polysilicon futures contracts near expiry. Rising polysilicon inventories fuel expectations of lower feedstock costs, adding to the downward pressure on wafer prices. Some wafer manufacturers cut prices to boost shipments. Transaction prices stand at RMB 0.92–0.95/piece for 183N, RMB 0.98–1.03/piece for 210RN, and RMB 1.10–1.13/piece for 210N.

By format, mainstream transaction prices for 183N wafers fall to RMB 0.95/piece, with some orders at RMB 0.92–0.93/piece. 210RN wafer prices span a wide range this week, reflecting different prices for orders signed earlier and later. The data covers November 5 through November 11. Some deals still closed at RMB 1.01–1.03/piece before last weekend, while recently signed orders were mostly priced at RMB 1.00–1.01/piece. Lower offers of RMB 0.98–1.00/piece have also emerged over the past two days. Deliveries for ground-mounted projects in China continue to support demand for 210N wafers, keeping the price range relatively narrow. With buying interest subdued, mainstream transaction prices have fallen to RMB 1.10/piece.

In the near term, November wafer output is expected to be only slightly lower than in October. Downstream buyers continue to restock mainly as needed, and wafer inventories are declining slowly. As year-end shipment pressure mounts, some wafer manufacturers are less inclined to hold prices firm, leaving room for transaction prices to fall further. With some low-priced deals already approaching production costs, room for a sharp near-term decline is limited. Wafer prices are expected to remain weak, with mainstream transaction prices likely to edge lower.
 

Cell prices in China

Prices for n-type cells this week:

  • 183N

Average price: RMB 0.29/W (down)

Price range: RMB 0.285–0.295/W

  • 210RN

Average price: RMB 0.31/W (flat)

Price range: RMB 0.305–0.315/W

  • 210N

Average price: RMB 0.31/W (flat)

Price range: RMB 0.31–0.315/W

Cell quotes move lower across all formats as upstream prices fall. 183N quotes decline again amid weak demand. For 210RN, the average price in China remains flat as vertically integrated manufacturers purchase little from external suppliers. As noted last week, expectations of lower prices in November and December are gaining traction. Only some tier-1 manufacturers with low inventories still deliver most orders at RMB 0.31/W, while tier-2 and tier-3 manufacturers are quoting closer to RMB 0.30/W.

Demand for 210N cells continues to benefit from year-end ground-mounted projects in China and module manufacturers’ efforts to accelerate shipments. Falling wafer prices keep the average at RMB 0.31/W, with RMB 0.315/W yet to become mainstream. As the year-end installation rush is set to end in early December, subsequent quotes may struggle to reach RMB 0.32/W.
 

Cell prices outside China

P-type cell prices (USD): The average price for 182P has stayed flat at USD 0.047/W this week, with a price range of USD 0.046–0.050/W. Demand for 182P cells outside China remains unchanged, with supply still primarily tied to toll manufacturing orders. Toll manufacturing fees have yet to soften this week given the small market share of p-type products, with quote ranges and delivery prices remaining stable.

N-type cell prices (USD): The average export price of 183N cells from China remains at USD 0.045/W this week, with the price range revised down to USD 0.044–0.045/W. Average cell prices outside China hold steady this week, but high-end quotes for late November and December have begun to soften. The December price outlook remains weak.
 

Module

Module prices in China continue to decline this week. BC module prices for distributed projects in China fall by RMB 0.01/W to RMB 0.80/W; the overall average declines by RMB 0.005/W to RMB 0.787/W.

As year-end approaches, most manufacturers are accelerating shipments to meet targets set at the start of the year. Prices are gradually showing signs of softening as manufacturers offer concessions.

In China, actual delivery prices for TOPCon modules are around RMB 0.65–0.71/W for ground-mounted projects and RMB 0.68–0.76/W for distributed projects.

Actual delivery prices for BC modules are currently around RMB 0.75–0.77/W for ground-mounted projects and RMB 0.78–0.81/W for distributed projects.

Outside China, the average TOPCon module price has remained at USD 0.114/W.

In the Middle East, regional conflict continues to disrupt shipments and cause logistics delays for most projects. Deliveries remain constrained for now.

In Europe, module prices still hold steady this week. For euro-denominated module prices in the European spot market, please refer to the Spot Price—Advanced Coverage.

In the U.S., the August 6 Section 232 announcement is expected to significantly affect module price trends. With the minimum import price (MIP) acting as a price floor, both imported and domestically manufactured module prices are expected to rise after the measures take effect. 

In India, prices for a small number of recent orders have also moved higher, mainly driven by advance stocking amid the impact of the U.S. Section 232 measures. Price increases have been more pronounced for projects not subject to the Domestic Content Requirement (DCR), while changes for DCR projects have remained relatively limited, as demand is primarily driven by the domestic market.

為提供您更多優質的內容,本網站使用 cookies分析技術。若繼續閱覽本網站內容,即表示您同意我們使用 cookies ,關於更多 cookies 資訊請閱讀我們的 隱私權政策 。